The new system is composed of two components sold as a kit,
a push tube frame with a universal attachment kit, then a plow blade
available in four different widths 54 ,60, 66, 72.
Kit Requires a winch equipped with an automatic brake (Sold
Seperately). If you vehicle is not equipped with a Hitch Receiver Quadrax
strongly recommends adding a 2 receiver hitch on the ATV to install the
plow Kit. (Not included).
All plow blades are supplied with skids shoes and side
extensions, in addition, two types of wear bars are available, steel bars
for standard use comes standard with the Blade and the Optional
Thermoplastic UHMW for use on pavers, concrete or brick.
The frame is made of a U shaped steel arm going under the
vehicle to the rear and attaches to the hitch of the ATV. This frame is also
equipped with a shock absorbing device that minimizes the possibility of
damages that might be caused to the ATV in the event of a collision between
the plow and a fixed object.
The length of the frame is adjustable from 73 to 105,
allowing installation on most ATV models.
For UTVs or ATVs equipped with a track system, an extension is available as a option, changing the
lengths of the frame for 99 to 134.
The frame is equipped with a rotating plow support that
adjusts from left to right in 5 positions and simply locks in the desired
position with a spring loaded T-handle pin. A cable assembly for remote
control, sold separately, is available for controlling the locking action of
the T-handle pin so as to adjust the angle of the plow without leaving the
seat of your ATV.
A limit switch for the winch, also available as an option,
(Sold Seperately) prevents any damage that could be caused to the ATV or the
plow frame if the winch cable is pulled over the limit of the frame or after
the plow blade has reached its maximum height.